Apollo XP95 Optical Smoke Detector (55000-600APO) Online

An Apollo XP95 Optical Smoke Detector (55000-600APO).

• Fully compatible with C-TEC s XFP & ZFP XP95 Discovery Addressable Fire Panels.
• Works using the light scatter principle.
• Responds well to slow-burning, smouldering fires.
• Well-suited for bedrooms and escape routes.
• Red LED illuminates when the detector is in alarm.
• Certified to EN54-7 by the LPCB.
• Requires a 45681-210APO standard base or 45681-242APO low power relay base.
• Xpert card addressed for speedy installation.

• Technical

  Approvals certifications		Certified to EN54-7 by the LPCB
  Compatibility		Compatible with C-TEC s XFP ZFP XP95 Discovery Addressable Fire Panels
  Application operation		Generates an alarm when it detects a pre-set threshold of smoke penetration in its smoke chamber. Provides a very good response to overheating thermal combustion and a good response to smouldering glowing flaming combustion & flaming with high heat.
  Application temperature		N A
  Sensitivity		Nominal alarm threshold of 2.4% light grey smoke obscuration per metre
  Supply wiring		2-wire, polarity insensitive
  Supply operating voltage		17 to 28V DC
  Quiescent current		340µA average; 600µA peak
  Alarm current		2mA (LED illuminated)
  Indicators		Clear LED emitting red light when in alarm
  Connections		L1&L2 supply in out; +R remote LED +Ve connection; -R remote LED -Ve connection. (4mA remote LED current @ 5V measured across remote load).
  Product dimensions (mm)		100mm diameter x 42 mm H (not in base). 50mm height when in base
  Construction & finish		White polycarbonate V.O rated rated to UL94. Stainless steel terminals
  IP Rating		IP43
  Weight		105g (not in base); 157g (in base)
  Operating conditions temperature		-20ºC to +60ºC
  Notes		Requires a BF308XP standard base or BF308XPR low power relay base. 1mA power up surge current for 0.3 seconds

  Title	Default Title