AlarmSense Optical Smoke Detector and Sounder Visual Indicator Base (55000-394APO) For Discount

An AlarmSense Optical Smoke Detector and Sounder Visual Indicator Base (55000-394APO).

Optical Smoke

• A high quality optical detector.
• Suitable for use with C-TEC s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
• Housed in a pure white polycarbonate moulding.
• Fitted with two alarm LEDs to allow 360º visibility.
• Third-party certified to EN54-7 by UL International (UK) Limited.
• 9-33V DC operating voltage.
• Requires a 45681-244APO AlarmSense base.
• Can also be purchased as part of a detector sounder or detector sounder visual indicator base combination.

• Sounder Visual Indicator Base

  • Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
  • 70d-87dB(A) sound output (visual indicator activates with sounder).
  • Certified to EN54-3 by UL International (UK) Limited.
  • Suitable for use with C-TEC s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
  • AlarmSense priority non priority signal recognition
  • Detects the removal of a detector head and reports a fault
  • Continues to work during unauthorised removal of detector.
  • High and low volume ranges.
  • Red and white caps available for stand-alone use.
  • Can also be purchased as part of a detector sounder visual indicator base combination.

  • Technical

    Optical Smoke

    Approvals certifications		Certified to EN54-5 by UL International (UK) Limited
    Application operation		Generates an alarm condition when it detects a pre-set threshold of smoke penetration into the smoke chamber
    Supply wiring		2-wire monitored, polarity insensitive
    Supply operating voltage		9 to 33V DC
    Quiescent current		50µA @ 15 VDC
    Alarm voltage		9 to 33V DC
    Alarm current		1.5mA @ 2-8.5V; 25 + – 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V
    Alarm reset voltage		2V max (1 second alarm reset time)
    Product dimensions (mm)		100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base)
    Construction & finish		White polycarbonate
    IP Rating		TBC
    Weight		100g

     

    Sounder Visual Indicator Base

    Approvals certifications		Certified to EN54-5 by UL International (UK) Limited
    Application operation		Designed to be ceiling mounted with an AlarmSense fire detector. Red and White caps available for stand alone use
    Supply wiring		2-wire monitored, polarity insensitive
    Supply operating voltage		9 to 33V DC
    Quiescent current		Less than 20µA @ 12VDC
    Alarm voltage		9 to 33V DC
    Nominal SPL (Sound Pressure Level)		87dB(A) max (high volume setting); 70dB(A) nominal (low volume setting)
    Alarm current		5mA (sounder active current at 24V)
    Product dimensions (mm)		1115mm diameter x 40mm deep (without optional AlarmSense detector)
    Construction & finish		White clear polycarbonate. Red and white caps available if not use with an AlarmSense fire detector
    IP Rating		TBC
    Weight		100g

     

    Documents

    AlarmSense Device Instructions

    Title	Default Title