AlarmSense Base Sounder (45681-510APO) Online

An AlarmSense Base Sounder (45681-510APO).

• Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point.
• 70d-87dB(A) sound output.
• Certified to EN54-3 by UL International (UK) Limited.
• Suitable for use with C-TEC s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
• AlarmSense priority non priority signal recognition
• Detects the removal of a detector head and reports a fault
• Continues to work during unauthorised removal of detector.
• High and low volume ranges
• Red and white caps available for stand-alone use.
• Can also be purchased as part of a detector sounder base combination.

• Technical

  Approvals certifications		Certified to EN54-5 by UL International (UK) Limited
  Application operation		Designed to be ceiling mounted with an AlarmSense fire detector. Red and White caps available for stand alone use
  Supply wiring		2-wire monitored, polarity insensitive
  Supply operating voltage		18-33VDC (sounders active); Less than 15VDC (sounders off)
  Quiescent current		Less than 20µA @ 12VDC
  Nominal SPL (Sound Pressure Level)		87dB(A) max (high volume setting); 70dB(A) nominal (low volume setting)
  Alarm current		5mA (sounder active current at 24V)
  Product dimensions (mm)		115mm diameter x 40mm deep (without optional AlarmSense detector)
  Construction & finish		White polycarbonate
  IP Rating		TBC
  Weight		150g

  Documents

  AlarmSense Device Instructions

  Title	Default Title